12/18/2023 0 Comments 300 gallon fish tankPowerhead Mounting Height Powerhead Placement: Flow Direction Gyre-style pumps should be mounted just below the water’s surface to create ideal surface agitation.Barebottom Aquariums: The lack of a sand bed allows for positioning the powerheads significantly lower in the water column.Tanks with Sand Bed: For tanks with a sand bed, keep the wave pumps high enough in the water column to prevent disturbing the sand bed.2+ Pumps: For powerheads on opposite sidewalls, mount them at offset heights with one pump in the upper third of the tank and the other pump in the lower third of the tank.1 Pump: Place the powerhead at a height approximately ⅓ of the way down from the water surface.Placing one powerhead in the lower part of your tank behind your rock work and placing one higher up on the opposite sidewall will help remove waste and detritus and create the water movement necessary for coral health. When it comes to how high or low to place the pump in the tank, you will want to consider where your flow dead spots are and where your corals lack ideal flow. Powerhead side-wall & back-wall placement Mounting Height: Powerhead Placement Add additional powerheads, as needed, for targeting dead spots. For tanks 24” wide or more: If the aquascape is in the middle of the tank as opposed to up against the back wall, place one powerhead on the back wall for every 24” of tank length.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |